UniRC 7 Series Q&A
Q1
The UniRC 7 handheld ground station runs on the Android system and natively supports Google services.
Q2
The Android system on UniRC 7 can install any applications that support Android 9.0 and above.
Q3
The UniRC 7 handheld ground station's built-in Android system supports multiple languages, including Chinese, English, German, Russian, French, Japanese, Korean, Italian, Portuguese, Arabic, Bulgarian, Catalan, Czech, Danish, Greek, Spanish, Finnish, Hebrew, Hindi, and more, totaling 211 languages. You can easily switch languages in the system settings menu.
Q4
Using the original PD 30W fast charging adapter, the UniRC 7 remote can be fully charged in 4.5 hours when powered off. The full battery life can last up to 11 hours.
Q5
The UniRC 7 sky unit is equipped with dual network ports and can connect to two cameras. Using the UniGCS application, you can view dual video streams simultaneously. Refer to the manual for detailed instructions on dual video streaming.
Q6
The SIYI link is a transparent transmission system that can transmit any data and protocol, but it is not compatible with third-party proprietary protocol links.
Q7
It supports a maximum bandwidth of 20M, with specific upload and download bandwidth values varying based on the selected transmission type.
Q8
The UniRC 7 Pro is a professional version designed for advanced users. Compared to the standard version, it features a higher resolution 1080P touchscreen display, additional HDMI ports, and Ethernet connectivity. It also supports both 5G and 2.4G wireless transmission, offering more functionality and enhanced communication capabilities for industry drone users.
Q9
Open-source ground station software like QGroundControl and MissionPlanner are compatible. The Android version can run directly on the UniRC 7, while the Windows version can communicate with the UniRC 7 via Bluetooth, UDP, or the Type-C upgrade port.
Q10
1. Open UniGCS and initiate binding on the remote controller (the ground unit's red light flashes rapidly).
2. Press and hold the binding button on the air unit for 2 seconds (the red light flashes rapidly).
3. Wait 5–10 seconds; a solid green light indicates successful binding.
2. Press and hold the binding button on the air unit for 2 seconds (the red light flashes rapidly).
3. Wait 5–10 seconds; a solid green light indicates successful binding.
Q11
Yes, it supports it. You can choose this as an optional configuration when purchasing.
Q12
Bluetooth, UART serial port, UDP, and Type-C (Upgrade mode).
Q13
1. Check the wiring between the flight controller and the air unit.
2. Confirm that the connection method and baud rate match.
3. Verify that the firmware is up to date.
4. Switch the TELEM interface.
2. Confirm that the connection method and baud rate match.
3. Verify that the firmware is up to date.
4. Switch the TELEM interface.
Q14
Dual control, Remote relay, Wireless relay.
Q15
12-76V, requires power supply from a power battery.
Q16
3-position mode, 6-position mode, and Off, configurable in the system settings.
Q17
Yes, it is set to external USB flash drive by default, but can be manually configured as a serial port
(UniRC7 Pro only).
(UniRC7 Pro only).
Q18
Standard version: 2 detachable 2.4G antennas.
Pro version: 2 quick-release 5G antennas and 2 detachable 2.4G antennas.
Pro version: 2 quick-release 5G antennas and 2 detachable 2.4G antennas.
Q19
Yes, only the UniRC7 Pro is equipped with a LAN port, which can connect to a PC via an RJ45 adapter cable for video output.
Q20
It represents the current theoretical transmission bandwidth, not the current amount of data being transmitted.
Q21
Transmission distance and anti-interference performance: decrease in that order. Bitrate: increases in that order.
Q22
Three methods are supported: HDMI interface (not supported on the standard version), WiFi hotspot sharing, and Ethernet port (not supported on the standard version).
Q23
Under low interference conditions:
Downlink: 4Mbps–65Mbps
Uplink: 1Mbps–8Mbps
Downlink: 4Mbps–65Mbps
Uplink: 1Mbps–8Mbps
Q24
Yes, switching the video transmission mode, bandwidth, or frequency band will disconnect the current binding. Such operations are prohibited during flight.